Installation Manual
Table Of Contents
- Table of Contents
- Table of Tables
- Table of Figures
- 1. About this Manual
- 2. Safety
- 3. Package Removal and Inspection
- 4. Installation
- 5. Electrical Connections
- 5.1 The Overview of Electrical Connection
- 5.2 Opening the Front Case Cover
- 5.3 The Overview of the Connection Area
- 5.4 Battery Installation
- 5.5 Inner Wiring Connection (Power and Signal Wire Connection for BMS)
- 5.6 Closing the Front Case Cover
- 5.7 A Method of Locking the Distribution Box (Board)
- 5.8 An Installation Method of Energy Meter Electrical Connection
- 5.9 A Connecting Method of the DC Line from the PV
- 6. Communication Connection
- 7. Entering Initial Installation Information
- 7.1 Information Input Administrator
- 7.2 System Information input stage
- 7.3 PC Direct Connection and Local Setting Value
- 7.4 Web Page Connection
- 8. Operation Test
- 9. Problem Confirmation
- 10. Maintenance
- 11. Technical Specifications
- 12. Disassembly
- 13. Contact
3. Package Removal and Inspection
3.2 Checking for damage in Delivery
When opening the box that contains Samsung 3.6 kWh All In One system in it, check for any
possible damage caused in transit and ensure the correct number of the components
therein. If there is a scratch on the enclosure, contact your local dealer for inspection and
service.
3.3 Identifying Samsung 3.6 kWh All in One
Attached on the enclosure of this product is the Type Label where the identity of this
product is described. For safe usage, make sure that the following product information is
indicated on the Type Label.
■ Product Name
■ Device Type (Model)
■ Serial Number (Serial No.)
■ Device-specific characteristics
■ Certification Lists
■ Warnings and Notification
The model No. of 3.6 kWh All In One system is defined as below.
■ ELSR362-00002
• ELSR: Residential application
• 36: Battery capacity (x0.1kWh)
• 2: Battery capacity group (Less than 10kW)
• 00002: product line number
The model No. of INVERTER (power conditioning system) is defined as below.
■ SJ94-00108B
• SJ: battery for ESS
• 94: Ass’y
• 00108: product number
• B: National Code (UK)
The Type Label is shown in the [Figure 3-5].
12 United Kingdom (Eng.) 05/2015. Rev1.1