Installation Manual
Table Of Contents
- Table of Contents
- Table of Tables
- Table of Figures
- 1. About this Manual
- 2. Safety
- 3. Package Removal and Inspection
- 4. Installation
- 5. Electrical Connections
- 5.1 The Overview of Electrical Connection
- 5.2 Opening the Front Case Cover
- 5.3 The Overview of the Connection Area
- 5.4 Battery Installation
- 5.5 Inner Wiring Connection (Power and Signal Wire Connection for BMS)
- 5.6 Closing the Front Case Cover
- 5.7 A Method of Locking the Distribution Box (Board)
- 5.8 An Installation Method of Energy Meter Electrical Connection
- 5.9 A Connecting Method of the DC Line from the PV
- 6. Communication Connection
- 7. Entering Initial Installation Information
- 7.1 Information Input Administrator
- 7.2 System Information input stage
- 7.3 PC Direct Connection and Local Setting Value
- 7.4 Web Page Connection
- 8. Operation Test
- 9. Problem Confirmation
- 10. Maintenance
- 11. Technical Specifications
- 12. Disassembly
- 13. Contact
2. Safety
2. Safety
2.1 Intended Use
NOTICE
The 3.6 kWh All in One system is intended for residential use only.
The 3.6 kWh All in One system should not be used for commercial or
building.
The 3.6 kWh All in One system is designed for residential use. It is a single-phase, grid-
connected system of solar energy sources and Li-on Battery energy storage.
The 3.6 kWh All In One system uses solar energy power connected to the input/output
terminal installed on the side of the device in order to:
1) charge the Li-Ion battery energy storage,
2) provide a supply to the household load, and
3) convert direct current (DC) electricity of the battery to alternating current (AC) to
discharge as household single-phase load or electric system.
This device should not be used for any purpose other than the purpose described in this
installation manual. Any substitute use of this device, random change in any of its parts, and
use of components other than sold or recommended by Samsung SDI will nullify the
product
’s guarantee. For example, Samsung Li-Ion battery energy storage should not be
replaced by other manufacturer’s battery storages. For further information on proper use of
this device, contact the Samsung SDI Service line or visit at “www.samsungsdi.com”.
[Figure 2-1: Connection Diagram]
4 United Kingdom (Eng.) 05/2015. Rev1.1