Installation Manual

ENG. Version for UK Product
Revision Date : 6
th
March 2015
4
■ Energy Meter Install Guide for UK - Setting (3/3)
ⓐ
(C2000M Meter Setting)
1. Push the setting button ⓐ.
▶ Please keep pushing the Green button until the screen show [1-0:0.0.10] ⓑ.
And you can find the OBIS CODE [1-0:0.0.10] as below picture.
2. C2000M Meter is set to have default value of 1~4.
Check if the value shown here is within the default range above ⓒ.
※ For C2000M, you can not change the setting of its values. You can only read the
value that is shown in the display (Read Only). Check the Modbus address.
(All-in-One Setting)
3. Set the above value ⓒ as the Modbus address of the SIM.
ⓑ
ⓒ