Operating Manual

Transport
Version 1.1 Page 32 of 92
3 Transport
3.1 Safety instructions for transport
Target group
Safety instructions intended for the installation personnel who transport, install and put the BMZ ESS 7.0 battery
storage system in operation.
Safety instructions
For transporting the battery storage system and when working on electrical devices, please follow the safety
instructions from the Safety section, page 9.
3.2 Transporting the battery storage system
Delivery of the battery storage system
Delivery The battery storage system is packed in a mechanically robust, three-walled corrugated paper
carton and delivered.
Incoming inspection Check for the completeness using the delivery note.
Damage Check the delivery for damage.
Visual inspection: e.g. damaged packing, scratches, dents, paint damage, missing components
Is the delivery damaged during transport:
• Ask the forwarding agent to acknowledge obvious transport damage in writing and
on the site.
• Contact the last forwarding agent immediately.
• Store the packing (for a possible inspection by the forwarding agent or for returning
the product).
• Take photos for easier documentation.
• Write a short fault report.
• Never install or operate a potentially or obviously defective battery storage.
Check the goods at the time of acceptance
Before accepting the goods, check whether the shipment is complete and flawless. The operating manual contains an
exact list of all components.
Before accepting the goods, check whether the carton is broken, deformed or destroyed. In such case, refuse the
acceptance or accept only with conditions and a written confirmation of the forwarding agent.
Immediately check whether the test seal in the battery is intact. The inner housing of the battery has 3 test seals. If one
test seal is destroyed, refuse to accept the goods.