User Manual
E-6
PREPARATION
Always be sure to remove the 
power plug from the wall outlet.
FILTER INSTALLATION
4
E-6
1
Remove the Back Panel.
PREPARATION
FILTER INSTALLATION
2
Remove the Filters from 
the plastic bag.
3
Install the Filters in the 
correct order as shown.
Install the Back Panel.
Deodorizing filter
(The same on both sides.)
Always  be  sure  to  remove  the 
power plug from the wall outlet.
Deodorizing filterHEPA filter 
HEPA filter
Click
Place the surface 
with tag.
Back Panel
Tag
E-7
3
CAUTION
REFILLING THE HUMIDIFYING TRAY
1
Pull out the 
Humidifying Tray
.
Humidify air passed through by vaporizing water pumped up from Humidifying Tray.
The unit can be used even without water in the Humidifying Tray. 
• Do not expose the unit to water. Doing so can cause a short circuit or electrical shock.
• Use only fresh tap water. Using other water sources risks the growth of molds, fungi, 
 or bacteria.
• Do not use hot water (40 ºC), chemical agents, aromatic substances. Doing so can 
 deform the unit or cause it to malfunction.
• When removing and installing the Humidifiying Tray, be careful not to spill any water. 
ENGLISH
• Return the Tray Handle to its original position 
 before installing.
CAUTION
2
Fill the 
Humidifying Tray
 with 
tap water by method  or  .
CAUTION
CAUTION
・The Filter Frame is floated up when water 
 is filled.
• When carrying the Humidifying Tray, hold 
  it with both hands or grip the Tray Handle.
• Gently fill it with water to avoid splashing 
  water.
• Do not fill beyond the “FULL” indicator.
   The Humidifying Tray will not fit into the 
unit if it is filled above the ‘FULL’ indicator.
A B
A
B
OR
Clean the Humidifying Tray if it becomes
dirty or there is a noticeable odor.
(Ref. E-12,E-13)
Install the 
Humidifying Tray
.
FULL
FULL
Tray Handle
Locate the Handle 
in front of Separator.
Do not locate the Handle 
on or behind Separator.
Handle
Separator
C
L
EAN 
ION 
SHOWER
C
L
EA
N 
ION 
SHOWER
CLEAN 
ION 
SHOWER
KC-F30J_EN.indd 6 2018/05/24 13:24:49










