User Manual

FUY30JW
Breathe easy with the benefit of Plasmacluster Ion technology and
the two-in-one filtration system.
Filtration system
The two-in-one air filter joins benefits of a HEPA*
1
and an Active
Carbon filter in one simple and cost effective solution. The Mesh
pre-filter helps prevent dust and dirt particles from clogging the
main filter ensuring it’s long use.
Unique Airflow Performance
The long and wide emission nozzle at a 20º angle provides the
benefit of a faster airflow and efficient intake, enabling quick
removal of dust and particles including removal in lower levels
of the room for more effective cleaning.
*1 HEPA filter EN1822 class H10
FUA80JW
With the ability to decrease odours and reduce dust, pollen and
mould for a room of up to 62m² floor size at the maximum fan
speed using Sharp’s innovative filtration system and Plasmacluster
Ion technology, this allows you to manage the air quality in your
home, helping to protect you and your family from the affects of
allergens and airborne substances.
Dust Sensor and Clean Sign
The in-built Dust Sensor automatically monitors the dust pollution
levels in the air. This is indicated on the Clean Sign lighting which
shows if the air quality in the room is clean or impure.
Quick Clean
Selecting the Quick Clean mode enables the Air Purifier to operate
at HIGH fan speed for 15 minutes before returning to the prior
operation setting. This mode allows for a quick and effective clean.
Dual Active and Passive Air Purification
Using both Active and Passive forms of Air Purification not only will filter indoor dusts using the filtration system, but also inactivate airborne
microbes at the same time with Sharps Plasmacluster Ions being dispersed into the air.
Dust Collection /
Deodorising Filter
HEPA Filter*
Deodorising
Pre Filter
Dust Sensor
Sharp Air Purifiers
* HEPA filter traps 99.97% of particles as small as 0.3 microns
from the air that is drawn through the filter system.
FUY30JW / FUA80JW
Specifications
Model FUY30JW FUA80JW
Air purifying system High-density PCI generator & fan High-density PCI generator & fan
Plasmacluster ion modes On/Off On/Off
Plasmacluster ion density (ions/cm³) 7,000 7,000
Recommended room floor size 21m² 62m²
Recommended area for high density Plasmacluster ions*¹ 13m² 30m²
Fan speed modes max / med / low max / med / low / auto
Special program mode High-density Plasmacluster Ion
shower
N/A
Voltage / frequency (V, Hz) 220-240, 50Hz 220-240, 50Hz
Power input (W) (Max/med/low) 49 / 32 / 23 75 / 20 / 5
Standby Power (W) 1 0.75
Inverter Operation No Yes
Airflow (max/med/low) (m³/hour) 180 / 120 / 60 480 / 300 / 120
Air suction power 180 m³ / hour 480 m³ / hour
Noise level (max / med / low) (dB) 44 / 35 / 24 53 / 41 / 23
Filter type Dust Collection HEPA & deodorising 2-in-1 HEPA
Deodorising Yes Yes
Filter life HEPA / Deodorising Up to 2 years Up to 2 years
Sensor N/A Dust
Clean sign indicator N/A Yes
Light control button N/A Yes
Dimensions (WxHxD) (mm) 365 x 510 x 150 404 x 620 x 247
Net weight (kg) 5 8
Replacement filter FZY30SFJ FZA80SFE
*1 Size of room in which approximately 7,000 ions can be measured per cm³ in the centre of the room (at a height of approximately 1.2 metres from the floor) when the product is placed next to
a wall and operated at the MAX operation position.
Passive – Filtration System
Active – Plasmacluster Icons
Efficient front air intake
at 20° angle
Aerodynamic structure quickly
collects dust and other particles
from low parts of a room