Specifications
ENGLISH
DEUTSCH
E-19
Remove the MIST Filter from the MIST
Tray.
• Be careful of the water drops that may fall.
MIST FILTER
The frequency of maintenance (descaling) will depend on the hardness or the impurities
of the water that you use; the harder the water the more often descaling will be necessary.
4
5
1
6
Preparing the descaling
solution.
Citric acid, available at some drugstores, or
100% bottled lemon juice are used for
descaling. Choose either one to use, and
prepare the descaling solution.
<For using citric acid>
Dissolve 3 teaspoons of citric acid and 600 ml of
luke-warm water in a suitable container, and stir well.
<For using lemon juice>
Use only bottled 100% lemon juice with no pulp
(please check before using and strain through a fine
strainer there seems to be some pulp). Pour 50 ml
of lemon juice and 600 ml of luke-warm water in a
suitable container, and stir well.
2
Presoak the mist filter in the
solution prior to cleaning.
When using lemon juice,
it is recommended to
presoak longer than
citric acid.
Rinse the MIST Filter with
water.
• Change the water and
repeat this procedure 2-
3 times.
• Use clean water each
time.
• Inadequate rinsing may
cause citric acid odour
or changes in the
shape/colour of the
main unit.
3
Attach the MIST Filter to the
MIST Tray.
Plug in the product and
press the MIST Filter Reset
Button on the main unit.
• The Mist Filter Indicator Light turns ON to remind you when it is
time to clean the MIST Filter.
• The Indicator Light will turn ON after approximately 1 month of
all-day, 24-hour use in Humidify Mode.
• Please clean the MIST Filter.
You will notice reddish-brown or
white deposits forming on the surface
of the MIST Filter. These impurities
(calcium, etc.) are due to the
impurities contained in tap water; this
is not a defect. Replace the MIST
Filter when it is covered completely
in white deposits.
• The MIST Filter does not need to
be oriented in any particular
position (forward/backward, up/
down)
• When not using the device for a
prolonged period of time, be sure
to dry the MIST Filter completely
before installing.
MIST Filter Indicator Light
* Do not wash the MIST Filter vigorously.
The Mist Filter might be damaged.
Care Cycle
1 month
The MIST Filter Indicator Light turns on.