User`s manual

6-13
[6] System update in order to support the ladder monitor screen data function.
In order to display the ladder monitor, the "main program" and "I/F driver" of the LCD control terminal (ZM
series) should be updated to support the ladder monitor function.
Ladder monitor supported ZM-71SE version: V1.3.0.0 or later
- In order to update the system, it may take much time as all the data must be transferred to the main
housing.
Note: While upgrading the system, make sure to never turn OFF the power of the LCD control
terminal (ZM series).
System update procedures are as follows.
Click the [System update] button on the transfer dialog. The LCD control terminal starts data transfer.
If a program already sent to the LCD control terminal is the same or a later version than the program
you are trying to send using the "system update" function, the LCD control terminal displays the follow-
ing message.
Select "YES" for all the items.
After the data transfer is compete, the LCD control terminal returns to the original condition.
Display the "local main" screen on the monitor and check the version information.