User`s manual

4-13
(2) In case of using I/O bus expansion adapter
System can be configured with max. 8 racks when an expansion rack panel, JW-34ZB/36ZB/
38ZB, is connected with an I/O bus expansion adapter, JW-32EA. Each rack panel ID number will
be defined by combination of settings for the rack number switches on the expansion rack panel
and the JW-32EA.
The basic rack panel is fixed to rack No. 0.
It is a table registration error (70) or table verification error (60) when the rack number switch is set
as follows 1, 2, and the JW300 does not operate.
1. There are plural ON settings.
2. Rack numbers are duplicated with other expansion rack panel.
The shipping setting of rack number switch is "1 : switch 1 is ON," and that of I/O bus expansion
adapter is "1 to 3" side.
For I/O bus expansion adapter, see page 4-16 to 18.
Rack No.
1
2
3
4
5
6
7
4-7
1-3
Rack No. switch of
expansion rack panel
ON for only
No. 1
ON for only
No. 2
ON for only
No. 3
OFF for all
ON for only
No. 1
ON for only
No. 2
ON for only
No. 3
Rack No. switch of I/O bus
expansion adapter (JW-32EA)
1-3 side
1-3 side
1-3 side
4-7 side
4-7 side
4-7 side
4-7 side
１ ２ ３
１ ２ ３
１２３
１ ２ ３
4-7
1-3
4-7
1-3
4-7
1-3
4-7
1-3
4-7
1-3
4-7
1-3
１ ２ ３
[Ex.]
１ ２ ３
１ ２ ３
１２３