User`s manual

3) Use
Danger
• Don’t touch the terminal while the power is being supplied or you may have on electric shock.
• Assemble the emergency stop circuit and interlock circuit outside of the programmable
controller. Otherwise breakdown or accident damage of the machine may be caused by the
trouble of the programmable controller.
Caution
• "Run" or "stop" during operation should be done with particular care by confirming safety.
Mis-operation may lead to damage or accident of the machine.
• Turn ON the power source in the specified sequence. Turn ON with wrong sequence may
lead to machine breakdown or accident.
4) Maintenance
Danger
•Never connect battery in wrong polarity, or charge, disassemble, heat, throw into fire, or
short-circuit. Or it may be broken or ignited.
• Do not subject the battery to impact of any kind. Do not pull on the lead wires of the battery,
or liquid leakage accident may occur.
Prohibit
• Don’t disassemble or modify the modules.
Or fire, breakdown or malfunction may be caused.
Caution
• Turn OFF the power source before detaching or attaching the module.
Or electric shock, malfunction or breakdown may be caused.
• Replace with the fuses in specified ratings only.
Or electric shock, malfunction may be caused.