User`s manual
7-38
[4] Command (response)
This section describes the commands (and responses) that can be used for communication (in a computer
link) between the JW300 (control module) and a host computer.
(1) Command type
There are 39 commands. Mostly, they are classified as "read commands," "write commands," or
"control commands."
Command
Read out command
Write command
Control command
Control command Write command Read-out command
Monitor relay MRL 7-42
Monitor multiple relays MRS 43
Current value monitor of TMR/CNT/MD MTC 44
Relay, register, TMR/CNT/MD current value monitor
MRG 46
Monitor the current values of any required
relays, registers, TMR, CNT, or MD
MGS 47
Read out file register RFL 49
Read out file address RFLF 50
Read out parameter of RPSR 51
special I/O module RPS 52
Read out parameter of option module RPO 53
Read out system memory RSM 54
Read out date MDY 56
Read out time MTM 57
Set/reset relay SRR 7-42
Set/reset multiple relay SRS 43
Set/reset relay, register TMR/CNT/MD SRT 44
Write in relay, register, TMR/CNT/MD WRG 46
Write to any required relays, registers,
TMR, CNT, or MD
WGS 47
Write the same data in relay, register,
TMR/CNT/MD
FRG 48
Write in file register WFL 49
Write in file address WFLF 50
Write in parameter of special I/O module
WPSR 51
WPS 52
Write in parameter of option module WPO 53
Write in system memory WSM 54
Change setting value of TMR/CNT CTC 55
Set date SDY 56
Set time STM 57
Set time revision ACL 58
Stop operation of PLC HLT 7-59
Restart operation of PLC RUN 60
Monitor operation conditions MPC 59
Read memory capacity VLM 61
Read out write mode status SWE 41
Set write mode EWR 41
Turn back the message TST 59
Release secret/password registration PAS 60
Set secret function SES 60
Check secret function SEI 61
Function
Command
name
Write
mode
JW30H *
* : The JW30H has the same function.
: The JW30H does not have this function.
Contents
Messages that a personal computer transmits to the JW300
when it reads out data from the JW300.
Messages that a personal computer transmits to the JW300
when it reads out data from the JW300.
Messages that a personal computer transmits to the JW300
when it reads out data from the JW300.