User`s manual

7-8
(3) Free I/O registration (individual allocation)
Specify the top address for each rack (0 to 7), within the range of ｺ00000 to ｺ01577.
I/O addresses are registered continuously, starting from the specified top address, on each rack.
- Number of I/O points and I/O relay area.
Shown below are examples using basic rack panel (JW-318KB) and 7 expansion rack panels (JW-
38ZB).
- No. of I/O points, No. of all allocation points of I/O relays => See page 7-10.
Note: Be careful not to reuse the same number in the same system.
Set the top address
Rack No. 3
Rack No. 2
Rack No. 1
Rack No. 0
Rack No. 7
Rack No. 6
Rack No. 5
Rack No. 4
Set the top
address
Set the top
address
Set the top
address
Set the top address
Set the top
address
Set the top
address
Set the top
address
- In the example above, the rack numbers are listed in order installed.
eludomlortnoC stniopO/Ifo.oN
stniopnoitacollafo.oN
syalerO/Ifo
aerayalerO/I
UC213/UC113-WJ215stniop0821.xaM
UC223/UC123-WJstniop
stniop
stniop
4201stniop6351.xaM
UC233/UC133-WJ
6904stniop8402.xaM.xaM
.xaM
.xaM
01577ot00000
UC243/UC143-WJ
UC253-WJ
UC263-WJ
ｺ
ｺ