User`s manual

Thank you for purchasing our JW-32CUM1 control module for the JW30H series programmable controller.
This manual describes the system configuration of the JW-32CUM1, and gives instructions for using it.
Before using it, read this manual thoroughly to become familiar with functions of the JW-32CUM1.
The following other manuals are also available for the JW30H series (JW-32CUM1). We recommend reading
these together with this manual. (The items below are not described in this manual. Therefore, please refer to
the respective manual for details about the following topics.)
Manual name Details that affect the use of the JW-32CUM1
JW30H User's Manual,
Hardware Version
The descriptions in the items below give methods for operating the
JW30H (JW-32CUM1) and they are the same for other control modules
(such as JW-33CUH1).
- System design procedures and precautions.
- Use and wiring methods for the power supply module, I/O
modules, expansion rack panels, and I/O bus expansion adapters.
- Precautions for using I/O modules.
- I/O module specifications.
- ROM operation.
- Trial operation.
JW30H Programming
Manual, Ladder Instruction
Version
Software descriptions concerning the data memory, program memory,
system memory, and commands for the JW-32CUM1 (control section).
References to the "JW-32CUH1" in this manual should be read as "JW-
32CUM1".
JW-21CM User's Manual
When the JW-32CUM1 is used for communicating with a personal
computer through the JW-32CUM1's communication port. The
descriptions for computer link commands referring to the "JW-32CUH1"
apply equally to the "JW-32CUM1."
- Beside the manuals above, also refer to each of the manuals for JW30H option modules, special I/O modules,
and support tools (JW-14PG etc.).
- Should you have any questions and inquiries, please feel free to contact our dealers.
- The whole or partial photocopy of this booklet is prohibited.
- Contents of this booklet may be revised for improvement without notice.
Notes