User`s manual

13-7
Specifications
13
Items Specifications
Parameter memory
Parameter for special I/O module : 128 bytes x 32 modules
Parameter for special I/O module (Install in the remote I/O slave station) :
128 bytesx8modules
Parameter for option module : 64 bytesx7modules
Interrupt program
There are two types of interruption program, one is input interruption and the
other is timer interruption. Both types can be set independently of interruption
permission/prohibition. If interruption prohibition is set, you can use the
interruption label as the conventional label.
Input interruption : 16 points (LB1360 to LB1377)
Timer interruption : 1, 2, 5, 10, 20 ms in each (LB1353 to LB 1357)
Sampling trace
At normal [Using the2Kbytes of internal work area] :
Data can be traced for (relay 15 points + register 6 bytes) × 256 times, or
relay 15 points × 1024 times at an arbitrate period. (10 ms units)
At expansion [Using the 64 K bytes of file register] :
Data can be traced for (relay 15 points + register 6 bytes) × 8192 times, or
relay 15 points × 32768 times at an arbitrate period. (10 ms units)
Break function Available setting any program address as a break point.
Step operation Can execute program in one instructions unit.
N scan operation Execute operation each time the specified number of scans (1 to 9999).
Available forced
ON/OFF I/O
relay
Available switch ON/OFF for I/O relay regardless of the input signal or
operation result.
Debugging function