User`s manual

13-6
Specifications
13
Items
Specifications
System
memory
Number
(OCT)
Contents
#010 to 017 Monitor the timer.
#030 Monitor the minimum scanning time. (lower digit BCD)
#031 Ditto (upper digit BCD)
#032 Monitor the current scanning time. (lower digit BCD)
#033 Ditto (upper digit BCD)
#034 Monitor the maximum scanning time. (lower digit BCD)
#035 Ditto (upper digit BCD)
#046 Monitor the error detected I/O rack panel and slot No. (OCT)
#050 Monitor the error switch No. (Option module)
#051 Ditto (I/O link master module)
#052 Monitor the error address on user's program. (lower digit)
#053 Ditto (upper digit)
#114
Select notation from octal/decimal/hexadecimal in the
address/relay/register/label/application instructions.
#115
#136 Set the tool model.
#160 to 167 Store the error code of self-diagnosis.
#170 to 177 Store the error code on option module.
#201 Set the resetting conditions of TMR.
#202 Set the resetting conditions of CNT.
#206 Set the operation continue/stop at fuse blown detection.
#207 Set the operation continue/stop at option error.
#210 Selecting error history strage range.
#211 Set the operation continue/stop at I/O link master module error.
#220 Set file top address for comment memory.
#222 Communication system of PG/COMM 2 port.
#223 Select the clock feature.
#224
Set comment memory using area.
#225
#226 Set fixed scan time.
#227 Selecting the 10 ms timer function.
#230 Set the a latched relay area. (lower digit)
#231 Ditto (upper ditig)
#232 Set output hold address. (lower digit)
#233 Ditto (upper digit)
#234
Set the communication port 1.
#235
#236
Set the communication port 2.
#237
#240 to 243 Set interrupt processing.
#246 Set extend for allowable voltage interruption time.
#247 Selecting the rack top address.
#250 Set latched relay area of expansion relay area. (lower digit)
#251 Ditto (upper digit)
#252 Set output hold address of expansion relay area. (upper digit)
#253 Ditto (lower digit)
#255 Set ROM operation mode.
#256 Set ROM contents.
#257 BCC check code
#260 Model mode