User`s manual
12-12
M-net (Master Station) Function
12
Enter the program for slave stations 01 to 07
(8)
.
Enter the program to enable communication with the slave station PC.
1 Enter the program to transmit the send and receive data.
The top address for data memory is " ｺ1000," since SW1 (JW-10CM) and SW8 (JW-21CM) are
set to "0."
2 Enter the monitor program for the communication error relay.
The error flag address is "07310," since the switches in number 4 are set to "0" on slave stations
01 to 03
(8)
.
The error flag address is "15010," since the switches in number 8 are set to "0" on slave stations
04 to 07
(8)
.
Continued from the previous page.
Turn ON the power to the slave stations.
Set the parameters for slave stations 01 to 07
(8)
.
#260
#261
#260
#261
#260
#261
O-0 000
O-0 001
O-0 000
O-0 001
O-0 000
O-0 001
O-0 000
O-0 001
10
12
6
8
5
6
4
4
2
2
1
0
2
2
Setting
the station
number
System memory/
parameter number
Setting
(decimal notation)
Details
Slave
station 01
Slave
station 02
Slave
station 03
Slave
station 04
Slave
station 05
Slave
station 06
Slave
station 07
Number of bytes transmitted from the
master station (00) to slave station 01
Number of bytes transmitted from slave
station 01 to the master station (00)
Number of bytes transmitted from the
master station (00) to slave station 02
Number of bytes transmitted from slave
station 02 to the master station (00)
Number of bytes transmitted from the
master station (00) to slave station 03
Number of bytes transmitted from slave
station 03 to the master station (00)
Number of bytes transmitted from the
master station (00) to slave station 04
Number of bytes transmitted from slave
station 04 to the master station (00)
Number of bytes transmitted from the
master station (00) to slave station 05
Number of bytes transmitted from slave
station 05 to the master station (00)
Number of bytes transmitted from the
master station (00) to slave station 06
Number of bytes transmitted from slave
station 06 to the master station (00)
Number of bytes transmitted from the
master station (00) to slave station 07
Number of bytes transmitted from slave
station 07 to the master station (00)
End of settings
- For details about how to set the system memory and parameters, see the instruction manual
for the support tools (JW-14PG, JW-100SP, etc.).
07310
Communication error
15010 Communication error