User`s manual

11-8
Data link DL9 (master station) function
11
33
33
3 Individual monitoring flag
The individual monitoring flags are divided into 3 function flags: 1; Communication monitoring
flag, 2; PC operation condition monitoring flag (I) and 3; PC operation condition monitoring flag
(II), and each flag is available to monitor slave stations 01 to 17
OCT
.
The configuration of the individual monitoring flags are as follows:
07
17
07
06
16
06
05
15
05
04
14
04
03
13
03
02
12
02
01
11
01
07 06 05 04 03 02 01
10
17 16 15 14 13 12 11 10
17 16 15 14 13 12 11 10
7
65432
0
1
ｺ1502
ｺ1503
ｺ1504
ｺ1505
ｺ1506
ｺ1507
1. Communication monitoring flag
2. PC operating condition monitoring flag (I)
3. PC operating condition monitoring flag (II)
1. Communication monitoring flag
This is a flag to monitor communication condition with each slave station.
The operation conditions are as follows:
Flag
Operation conditions
15020 to 15037
Normally communicating
While the master station (JW-32CUM1)
is stopping
The initial sequence completion flag is
OFF.
Communication error with designated
slave station
Operation
ON
(all slave station)
Invalid
(all slave station)
OFF
(designated station)
2. PC operation condition monitoring flag (I)
This is a flag to monitor the slave station side PC operation conditions, while normally
communicating with each slave station.
The operation conditions are as follows:
Flag
15040 to 15057
Operation
ON
OFF
Invalid
Specific
slave
station
All slave
station
Operation conditions
While slave station PC is operating.
While slave station PC is stopping.
(program mode)
Slave station of which communication
monitoring flag is OFF.
While master station (JW-32CUM1) is
stopping.
The initial sequence completion flag is
OFF.
3. PC operation condition monitoring flag (II)
This is a flag to monitor error stops of the slave station side PC, while normally
communicating with each slave station.
The operation conditions are as follows:
Flag
15060 to 15077
Operation
ON
OFF
Invalid
Specific
slave
station
All slave
station
Operation conditions
While slave station PC is operating.
While slave station PC is stopping.
Slave station of which communication
monitoring flag is OFF.
While master station (JW-32CUM1) is
stopping.
The initial sequence completion flag is
OFF.