User`s manual

Remote I/O (master station) function
9-15
9
Errors on slave station
Error code
Contents Errors on master station
40
(H)
42(H)
44(H)
46(H)
47(H)
48(H)
60(H)
70(H)
71(H)
72(H)
73(H)
A0(H)
95(H)
Installed module check error
Output data check error
Special I/O hardware error
Special I/O parameter error
I/O rack panel error
I/O data bus error
Table verify error
Table registration error
No module error
No. of I/O points over error
Switch setting error
Master station PC error
(A master station JW-32CUM1
stops operation by error)
Mismatch communication
(When the connected master
station does not work)
Table verify error (88
(H))
Slave station I/O error (89
(H) to 8D(H))
Communication error (81
(H) to 84(H))
* On the master station, "installed module check error" (40
(H)
) while turning on the power will become
"I/O table or special module switch verify error" of slave station.
Remarks
- When errors (error code 40
(H)
to 73
(H)
) occur in series on the slave station, the JW-32CUM1
indicates the detected error rack/slot number and the error code in every 2 seconds alternatively
by the indication lamps.