User`s manual

DeviceNet (Master) Function
8-49
8
(5) Vender information address (slave mode)
The vender information is used when SHARP provides services to JW-32CUM1 (DeviceNet) users.
Do not use the vender information in your applications.
Address (*1)
Vender
information
Storage value (data details)
9th byte (39010)
10th byte (39011)
Vender ID
(2 byte)
104
(DCM)
Vender ID code
(Sharp = 104)
000
(DCM)
11th byte (39012)
12th byte (39013)
Device Type
(2 byte)
012
(DCM)
Device type (communication adapter =
012 )
000
(DCM)
13th byte (39014)
14th byte (39015
Product Code
(2 byte)
001
(DCM)
Product code
(JW-32CUM1 = JW-20DN = 001)
000
(DCM)
15th byte (39016)
16th byte (39017)
Revision
(2 byte)
02
(HEX)
Software version (The values left is
when version 2.4).
04
(HEX)
17th byte (39020)
18th byte (39021)
19th byte (39022)
20th byte (39023)
Serial Number
(4 byte)
Serial No.: (DCM)*2
(Written when manufacturing the JW-32CUM1)
21st byte (39024)
Product Name
(32 byte)
4A
(HEX) :J
"JW-20DN" of ASCII code.
22nd byte (39025) 57
(HEX) :W
23rd byte (39026) 32
(HEX) :2
24th byte (39027) 30
(HEX) :0
25th byte (39030) 44
(HEX) :D
26th byte (39031) 4E
(HEX) :N
27th byte (39032) 00
(HEX)
All 00(HEX)
::
::
:
:
52nd byte (39063) 00
(HEX)
53rd byte (39064)
Reserved area
-Donot change the numeric values.
Otherwise, malfunction will occur.
::
126th byte (39175)
127th byte (39176)
Scan list
establishing flag
When scan list is established, 01
(HEX) (if not 00(HEX)).
128th byte (39177)
Serial No.
establishing flag
When serial No. is established, 01
(HEX) (if not 00(HEX)).
*1: Addresses in parentheses are correct when the data table allocation system is set to "fixed
allocation."
*2: Serial number.
(DCM)
: Year manufactured (lower two digits of Western year: "03" for 2003)
: Month manufactured ("01" for January, ---, "12" for December)
: Model code (JW-32CUM1, JW-32CUM2, JW-20DN is "11")
: Serial number (reset each month)
Ex.: A unit first manufactured in Nov 2003: 0311110001(DCM)