Specifications

44
During the operation, the light volume on the workpiece used to
be inconsistent due to the changes of surrounding environment.
Inconsistency of the light volume could change the image s light
level, and hinder the stable inspection/measurement results.
VISUAL STATION uses light level automatic adjustment system
with illuminance monitoring function that provides the stable
screen image with the consistent light level.
New algorism reinforces the functions of conventional gray
search (correlation for normalization). This system provides a
stable search even if the workpiece you wish to search is
partially hidden or chipped.
It used to be・・・
○Difficult to conduct
the stable search
unless the
workpiece was
perfectly visible
and captured.
New algorism (S search) reinforces search function.
Reliable maintenance with lighting control
High basic performances together with various maintenance functions
High-quality IV assets are inherited, and S search and lighting control
are newly added.
(Patent pending)
With window for trigger set up, no
need for any external sensor even
for moving measurement. You can
select your trigger detection method
from binary processing, average light
level and gray search. Gray search
can be used for the workpieces for
which setting of the light range is tricky.
CCD trigger function requires no external sensor
Direction of movement
CCD trigger
High speed camera and partial image capture
function greatly reduce the inspection time.
VISUAL STATION can work with double-speed/quadruple-speed
cameras with progressive system CCD. Partial image capture
function speed up the image-capturing. And further reduction of
time can be possible by selecting from 4 modes to suite your
inspection/measurement purpose.
＊ Partial image is captured when 240 lines out of 480 lines are read.
＊ Standard cameras: IV-S30C1/IV-S30C2, high speed camera: IV-S30C3/IV-S30C4
＊ Full mode: odd /even lines are read, half mode: only odd lines are read.
(Notice)
Image-capture time will differ depending on the position of partial image
(max. 0.4ms in the case above)
Whole image is captured by half line
Whole image/half mode
IV
-
S51M ＋ High-speed camera
8.3ms
(Notice)
Only the necessary part of the image is captured by half line
Partial image/half mode
IV
-
S51M ＋ High-speed camera
4.2
ms
Whole screen is captured by full line
Whole image/full mode
IV
-
S51M ＋ High-speed camera
16.7ms
IV-S51M ＋ Standard camera
33.3ms
(Notice)
Only the necessary part of the image is captured by full line
Partial image/full mode
8.3ms
IV
-
S51M ＋ High-speed camera
IV-S51M ＋ Standard camera
16.7ms
Light level of the image is kept consistent by
light level automatic adjustment function.
Power source
for lighting
Lighting 2Lighting 1
Camera 2Camera 1
VISUAL STATION
Extension connector
(RS-232C/RS-422)
※Lighting equipment can be controlled up to 4 units.
●Contact our sales representative for the recommended lighting power source.
This system provides a
stable search even if the
workpiece to search is
partially hidden or chipped.
Operation
Maintenance
OperationOperation
MaintenanceMaintenance
VISUAL STATION is equipped with lighting control function.
When lighting power source for lighting control is used, general-
purpose serial interface can control ON/OFF of the lighting,
diagnose the light volume, and remotely control the lighting volume.
This function allows you to prevent from improper detection caused
by the lowered light volume.
With our VISUAL STATION...