User`s manual

Setting the Conditions for Each Object Type
3-19
3
[4] Image pre-processing
A comparative calculation between images, gray level changes, and space filter are available for image
pre-processing.
How to get to the "IMG PRE-PROC" screen
Select "OBJECT TYPE COND" and then "TYPE00"
or "TYPE(NEW)" on the "MAIN COND" screen.
Then select "MEA-CND(CAMERA1)" and "MEAS"
to open a measurement screen. At the " MEAS
SELECTION" item, press the SET key and choose
a measurement program from the popup menu.
Note: If the " MEAS SELECTION" is set to "NO,"
the image pre-processing cannot be speci-
fied.
Press the ESC key to return to the OBJECT TYPE
COND screen. Then select "IMG PRE-PROC."
The "IMG PRE-PROC" screen will appear.
For details about "COMPARE IMGS" (compare
images), see page 3-20.
For details about "CHNG GRAY LEVEL"
(change gray level), see page 3-22.
For details about "SPACE FILTER," see page
3-23.
MEASUREMENT 1 SCREEN COND SAVE
1
MEAS SELECTION POSI-DEVIATION
NO
POSI-DEVIATION
CHK-DEG-MATCH
INSPECT-LEAD
MEAS-BIN-OBJ
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MALTI-POSI
MULTI MATCHES
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEAS0(POSI-DEVIATION)
IMG PRE-PROC
MEAS CND
EVALUATION COND
DISTANCE&ANGLE COND
NUM-CALC
OUT-COND
POSI-CORRECT
MEAS(NEW)
MEA-CND(CAMERA2)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
+
+
+
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
1
COMPARE IMGS
2
COMP IMGS COND
3
CHNG GRAY LEVEL
4
CONTRAST MAGNI
5
SPACE FILTER
6
NUM.OF FILTER
SELECT OBJECT TYPE COND
F C1 BRT
IMG PRE-PROC SCREEN COND SAVE F C1 BRT
1
COMPARE IMGS NO
2
CHNG GRAY LEVEL NO
3
SPACE FILTER NO
Comparative
calculation between
images
Subtracting,absolute value of difference (between camera 1 and reference
image,between camera 2 and reference image, between camera 1 and
camera 2)
Gray level changes
Magnification by "n" processing, γ(+/-) correction, histogram widening,
midrange emphasis
Space filter
Smoothing (center/average),edge emphasis,edge extraction, horizontal
edge,vertical edge