User`s manual

2-1
Setting the Operating and System Conditions
2
2-1 Setting the operating conditions
Set the following operating condition items on the [TYPE RUN COND] menu for each object type.
How to display the TYPE RUN COND screen
On the "MAIN MENU," select "OBJECT TYPE
COND", "TYPE 00", and "TYPE RUN COND" in this
order.
The "TYPE RUN COND" screen will appear.
Chapter 2: Setting the Operating and System Conditions
Item to set Reference page
Monitor output 2-2
Image capture 2-4
Message display 2-5
Pattern display 2-6
Binary image display 2-7
θ angle correction image display
2-8
Operation main display 2-9
Evaluation change display 2-10
PC monitor screen 2-11
Through display 2-11
Extension function 2-12
OBJECT TYPE COND
TYPE00
TYPE RUN COND
IMAGE-ADJ
MEA-CND(CAMERA1)
MEA-CND(CAMERA2)
FINAL NUM.CALC
FINAL OUTPUT COND
OBJ-TYPE I/O
OBJ-TYPE SYS.
TYPE(NEW)
+
+
SELECT OBJECT TYPE COND
F C1 BRT
1 MONITOR OUTPUT
2 CAPTURE IMG
3 MESSAGE DISPLAY
4 PATTERN DISPLAY
5 SHOW BINARY IMG
6 SHOW θ FIX IMG
7 OPS MAIN DESP
8 DESP CHG-EVAL
9 PC-MNTR
0 THROUGH DISPLAY
q EXTENSION FUNC.
w DISPLAY+CURSOR 1
e CLOSS CURSOR COORD
r DISPLAY+CURSOR 2
t CLOSS CURSOR COORD
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
1 MONITOR OUTPUT CAM1
2 CAPTURE IMG PARTIAL-IMG
3 MESSAGE DISPLAY YES(NUMERIC)
4 PATTERN DISPLAY YES
5 SHOW BINARY IMG YES
6 SHOW θ FIX IMG YES
7 OPS MAIN DISP YES
8 DISP CHG-EVAL NO
9 PC-MNTR NO
0 THROUGH DISPLAY NO
q EXTENSION FUNC. NO
TYPE RUN COND SCREEN SAVE F C1 BRT
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC