User`s manual

1-20
Setting and Operating Outline
1
CV BRT
V*.**
(TYPE00)
- Display example when the monitor output is
set to "CAM1&NG-IMG (VERT)."
Display camera1
measured image
Display camera1 NG
image
CH BRT
V*.**
(TYPE00)
- Display example when the monitor output is
set to "CAM1&NG-IMG (HORIZ)."
Display
camera1
measured
image
Display
camera1
NG image
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
C2 BRT
V*.**
(TYPE00)
- Display example when the monitor output is set
to "NG-IMG."
Display
camera1
NG image
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
3. Return to the operation main screen (page 1-10) and start making measurements.
Shown below are examples of the NG image display.
When the IV-S33MX is used
CH BRT
V*.**
C2 BRT
V*.**
(TYPE00)
- Display example when the monitor output is
set to "CAM1&NG-IMG."
Display
camera1
measured
image
Display
camera1
NG image
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
(TYPE00)
- Display example when the monitor output is set
to "NG-IMG."
Display
camera1
NG image
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
When the IV-S31MX/32MX is used