User`s manual

7-16
Simplified Menu Operation
7
9. After the image window position has been set, move the cursor to the "REG." item using the left
and right keys, and press the SET key.
-The image will be registered in the memory and displayed in lower right corner of the screen.
- Move the cursor to the "DISP" item using the left and right keys, and press the SET key. Then,
the stored image will be displayed in the lower right corner of the screen. After checking the
image, press the ESC key.
10. Press the ESC key and move the cursor to the "3 SEARCH ARE (MDL 0)" item. Then, press
the SET key.
11. Create a search window to be used as the search area (area to be used for a gray scale search).
- The procedure for creating the search area is the same as described for the image window in
step 8.
12. Press the ESC key.
13. When a 2-point search is selected in the "1 REG" line, set items "4 REF. IMG ARE (MDL 1)"
and "5 SEARCH ARE (MDL 1)" by following the same procedures described in steps 7 to 12.
14. Press the ESC key to display all of the measurement condition items.
15. Move the cursor to the "OPS-MENU" item using the up and down keys, and press the SET key.
- The screen will return to the MAIN OPS MENU. That completes the setting of the
measurement conditions.
② REF IMG ARE(MDL0) MOVE UP.L(110,218) LO.R(174,277) CONTRAST SR
REG DISP
OPS-MENU
Cheak the stored
image. (DISP)
Image window
Search window
Object 1
3 SEARCH ARE(MDL0) MOVE UP.L(043,162) LO.R(305,311)
OPS-MENU
F.IMG C1 L

F.IMG C1 L
運転

①REG NO 1P-SCH 2P-SCH
② REF IMG ARE(MDL0) MOVE UP.L(110,218) LO.R(174,277) CONTRAST SR
REG DISP
③ SEARCH ARE(MDL0) MOVE UP.L(043,162) LO.R(305,311)
④ REF IMG ARE(MDL1) MOVE UP.L(301,288) LO.R(364,350) CONTRAST SR
REG DISP
⑤ SEARCH ARE(MDL1) MOVE UP.L(241,262) LO.R(461,394)
These lines will only
be displayed when
a 2-point search is
selected.