User`s manual

7-9
Simplified Menu Operation
7
[3] Pattern display
Select "YES or NO," to determine whether to display windows and other markings over the working image
displayed on the MAIN OPS MENU.
ËË
ËË
Ë Operation procedure
1. On the [TYPE RUN COND], move the cursor to the item "3 PATTERN DISPLAY" item with the
up and down keys, and press the SET key.
2. Move the cursor to "YES" or "NO" with the right and left keys, and press the SET key.
ËË
ËË
Ë Display examples
- When the pattern display mode has been
set to NO.
- When the pattern display mode has been
set to YES.
F.IMG C1 L
VX.XX



(TYPE00)
OK
MEAS XXXXms 2000-08-01 10:30
MEASURE 0 CAM1 POSITIONING
CHG-TYPE POSI-COND POSI-EVAL. SEL-CAMERA
OPS-CND
SYS-CND ADJ-CONTRAST SAVE SHUTTER
X0~7 Y0~7 READY
1X COORD.(MDL0) 000.0~511.0 X0=353.0 OK
2Y COORD.(MDL0) 000.0~479.0 Y0=120.0 OK
3MATCH LVL(MDL0) -10000~+10000 M0=+09620 OK
4X COORD.(MDL1) 000.0~511.0 X1=452.0 OK

5Y COORD.(MDL1) 000.0~479.0 Y1=420.0 OK
6MATCH LVL(MDL1) -10000~+10000 M1=+09524 OK


F.IMG C1 L
VX.XX


(TYPE00)
OK
MEAS XXXXms 2000-08-01 10:30
MEASURE 0 CAM1 POSITIONING
CHG-TYPE POSI-COND POSI-EVAL. SEL-CAMERA
OPS-CND
SYS-CND ADJ-CONTRAST SAVE SHUTTER
X0~7 Y0~7 READY
1X COORD.(MDL0) 000.0~511.0 X0=353.0 OK
2Y COORD.(MDL0) 000.0~479.0 Y0=120.0 OK
3MATCH LVL(MDL0) -10000~+10000 M0=+09620 OK
4X COORD.(MDL1) 000.0~511.0 X1=452.0 OK
5Y COORD.(MDL1) 000.0~479.0 Y1=420.0 OK
6MATCH LVL(MDL1) -10000~+10000 M1=+09524 OK


On the MAIN OPS MENU, move the cursor to the "OPS-CND" item, and press the SET key.

YES
NO
Patterns will not be displayed on the [MAIN OPS MENU.]
3 PATTERN
DISPLAY
Description
Patterns will be displayed on the [MAIN OPS MENU.]
[TYPE RUN COND]
1CAPTURE IMG PARTIAL-IMG WHOLE-IMG NO
2
MESSAGE DISPLAY YES(NUMERIC) YES(NO NUMERIC) NO
3
PATTERN DISPLAY YES NO
4
SHOW BINARY IMG YES NO