User`s manual

7-6
Simplified Menu Operation
7
5 Specify the display details on the
MAIN OPS MENU.
- The presence or absence of the message
display.
- The presence or absence of the pattern
display.
- Enable or disable the binary image
display.
6-2 to 5
7-27 and 28


7-7
7-8 to 10
7-11
7-5
7-12
7-13 to 16
7-17
7-26
7-25 and 26
Existence inspection
With correction
Without correction
7-23
7-24
7-18 to 22
7-22
7-26
7-25 and 26
Positioning
(Reference
pages)
(Reference
pages)
1 Menu selection
- Select "SIMPLIFIED MENU."
- Select "POSITIONING."
- Specify the camera number to use.
2 Camera settings (when the IV-S33M is
used)
- Select camera
- Image capture mode
3 Setting the communication conditions
- The presence or absence of serial output.
- Specify the communication parameters.
- Specify the computer link settings.
Only when
using serial
communica-
tio.
4 Select a method for capturing images.
6 Specify the object type.
7 Select a camera.
- When CAM 1 is selected, the SEL-
CAMERA item is not displayed.
8 Specify the shutter speed.
9 Specify the measurement conditions
for positioning.
- Select either a 1-point or 2-point search.
- Specify a reference image area.
- Specify a search area.
0 Specify the evaluation conditions for
positioning
q Save the data.
w Start the measurement operation
5 Specify the display details on the
MAIN OPS MENU.
- The presence or absence of the message
display.
- The presence or absence of the pattern
display.
- Enable or disable the binary image
display.
6-2 to 5
7-27 and 28

7-7
7-8 to 10
7-11
7-5
7-12
1 Menu selection
- Select "SIMPLIFIED MENU."
- Select "POSITIONING."
- Specify the camera number to use.
- Select whether or not to make an XY
correction.
3 Setting the communication conditions
- The presence or absence of serial output.
- Specify the communication parameters.
- Specify the computer link settings.
Only when
using serial
communica-
tio.
4 Select a method for capturing images.
6 Specify the object type.
7 Select a camera.
- When CAM 1 is selected, the SEL-
CAMERA item is not displayed.
8 Specify the shutter speed.
9 Specify the measurement conditions
for position correction.
- Select yes or not on the register line.
- Specify a reference image area.
- Specify a search area.
0 Specify the evaluation conditions for
position correction
q Specify the measurement conditions
for existence inspection.
- Enter a register number
- Specify a measurement area.
- Enter a threshold value.
-
w Specify the evaluation conditions for
an existence inspection.
e Save the data.
r Start the measurement operation.
2 Camera settings (when the IV-S33M is
used)
- Select camera
- Image capture mode
7-31 7-31
7-4 Setting procedures
The flow charts shown below outline the setting procedures on the simplified menus.