User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
6-7
Setting and Operating Outlines
6
6-4 Camera setting
The cameras that can be connected to IV-S31M/S32M/S33M controllers are as follows:
* You cannot use different types of cameras at the same time with the same controller (standard, high-
speed and EIA cameras cannot be mixed).
[1] For the IV-S31M/S32M
Only IV-S30C1/C2 standard cameras can be connected to the IV-S31M/S32M controllers. These
controllers do not have settings for the type of camera connected to it.
[2] For the IV-S33M
An IV-S30C1/C2 standard camera, IV-S30C3/C4 high-speed camera, or commercially available EIA
cameras can be connected to the IV-S33M. Select the camera type (camera synchronization, image
capture mode) in the "CAMERA TYPE" item on the [SYSTEM COND] menu to match the type of camera
you have connected.
- For details about finding the setting screens above, see page 7-31 for the simple menu and read the
"Camera settings" section of the IV-S30 (IV-S31M/S32M/S33M) User’s Manual, Function and Operation
for details about the standard menu.
(1) Image capture mode
When you are using the IV-S30C3/C4 high-speed camera or an EIA camera, you have to select an
image capture mode.
* 2 "Full + half" mode can only be selected when it is a high-speed camera.
- For a comparison of the image capture times, see page 7-32.
detcennocaremaC
)dradnats(1C03S-VI
)orcim(2C03S-VI
)deeps-hgih(3C03S-VI
dnaorcim(4C03S-VI
)deeps-hgih
aremacAIE
-laicremmoc(
)elbaliavayl
AREMAC
EPYT
METSYS(
)DNOC
noitcelesaremaCdradnatSdeeps-hgiHAIE
aremaC
noitazinorhcnys
- woleb)2(eeS
------
royllanretxE
yllanretni
dezinorhcnys
edomerutpacegamI
- woleb)1(eeS
---flah+lluf,flahrolluFflahrolluF
edomerutpacegamI sliateD
lluFegamiehtnisenilehtfollaerutpaC
flaHegamiehtnisenilsddoehterutpaC
2*flah+lluF
seniltegrattnemerusaemeht,edomegamilaitrapehtnI
edomflahnierasrehtoehtdnaedomllufniera
rellortnoC saremacelbatcennoC
M13S-VI
aremacdradnatS1C03S-VI
aremacorciM2C03S-VI
M23S-VI
1*M33S-VI
aremacdradnatS1C03S-VI
aremacorciM2C03S-VI
aremacdeeps-hgiH3C03S-VI
aremacdeeps-hgih,orciM4C03S-VI
)elbaliavayllaicremmoc(aremacAIE