User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
6-5
Setting and Operating Outlines
6
1. Move the cursor to the "2SIMPLIFIED MENU"
item with the up and down keys, and press the
SET key.
- The [SIMPLIFIED MENU] screen will
appear.
2. As described on the previous page, select each
item that you want to specify, and press the
SET key.
[SELECT MENU]
1STANDARD MENU (STD RUN-MENU)
2SIMPLIFIED MENU (SEL EASY MENU)
1. Move the cursor to the "5STD
→
SELECT
MENU" item on the [SYSTEM COND] menu,
and press the SET key.
2. Select the "EXEC" item, and press the SET
key. The [SELECT MENU] screen will appear.
Move the cursor to the "SYS-CND" item on the MAIN OPS MENU screen, and press the SET key.
[SYSTEM COND]
1
I/O CONDITIONS
(TO NEXT SUB-MENU)
2COMM.SET (TO NEXT SUB-MENU)
3
COMPUTER LINK
(TO NEXT SUB-MENU)
4INITIALIZATION ALL-INIT INIT-RAM
5
STD→SELECT MENU
EXEC
1. Move the cursor to the "5 SIMPLE MENU →
STD" item on the [SYSTEM COND] menu, and
press the SET key.
2. Select the "EXEC" item, and press the SET key.
The [SELECT MENU] screen will appear.
Move the cursor to the "SYS-CND" item on the MAIN OPS MENU screen, and press the SET key.
[SYSTEM COND]
1SERIAL OUTPUT NO PC-LINK SERIAL
2COMM.SET
(TO NEXT SUB-MENU)
3
COMPUTER LINK
(TO NEXT SUB-MENU)
4INITIALIZATION ALL-INIT INIT-RAM
5
SIMPLE MENU→STD
EXEC
1. Move the cursor to the "1STANDARD MENU"
item with the up and down keys, and press the SET
key.
- The [MAIN OPS MENU] screen with the
standard menus will appear.
[SELECT MENU]
1STANDARD MENU (STD RUN-MENU)
2SIMPLIFIED MENU (SEL EASY MENU)
(2) Changing the screen from the standard menus to the simplified menus configuration
Notes
- Make sure to SAVE the system configuration data after you change from the standard menus
to the simplified menus configuration. Otherwise, your selection of the simplified menus
configuration will be ignored the next time you turn ON the power.
- When you change the IV-S30 configuration from the standard menus to the simplified menus,
the data will be saved into the RAM.
(3) Changing from the simplified menus to the standard menus configuration
To select whether "POSITIONING" or "EXISTENCE" is displayed on the simplified menus, select the
[2 SIMPLIFIED MENU] item on the [SELECT MENU] screen, and specify each item you want to
appear on the simplified menus.
Notes
- Make sure to SAVE the system configuration data after you change from the simplified menus
to standard menus configuration. Otherwise, your selection of the standard menus
configuration will be ignored the next time you turn ON the power.
- The items that you selected for display on the simplified menus will be saved when the screen
configuration is changed to the standard menus. (See page 6-2.)