User`s manual

5-32
Connection and Installation Methods
5
5-4 Installing, connecting, and wiring the IV-S30EA1 camera converter
[1] Connection to the IV-S33M controller
Connect the IV-S30EA1 camera converter to the IV-S33M controller using the main interface cable that
comes with the camera converter.
Note: Do not connect the IV-S30EA1 to an IV-S31M/S32M controller.
1 Connect the camera 1 and 2 connectors on the main interface cable to the CAMERA 1 and
CAMERA 2 connectors on the IV-S33M. Make sure the connector numbers match.
Note: Make sure to turn OFF the power before connecting or disconnecting the cameras or
connector.
- To unplug a connector, hold the plug housing and pull it straight out.
- Any camera plugged into the CAMERA 1 connector will be system camera 1 and any camera
plugged into the CAMERA 2 connector will be system camera 2 in the IV-S30 system.
2 Connect the converter connector on the main interface cable to the controller connector on the IV-
S30EA1.
• External dimensions of the main interface cable.
+24V
0V
FG
CAMERA1
CAMERA2
CONTROLLER
Ｘ６
Ｙ２ Ｙ３Ｙ４ Ｙ５ Ｙ６
ＢＵＳＹＣＯＭ
ＣＯＭ
＋２４Ｖ
０Ｖ
ＯＵＴＰＵＴ
ＩＮＰＵＴ
Ｘ７
Ｙ７Ｙ０ Ｙ１
Ｘ０ Ｘ１Ｘ２ Ｘ３ Ｘ４ Ｘ５
ＲＥＭＯＴＥ
ＵＳＢ
ＲＳ２３２Ｃ／ＲＳ４２２
ＣＡＭＥＲＡ１ＣＡＭＥＲＡ２
ＶＩＤＥＯ
ＰＯＷＥＲ
IV-S33M
IV-S30EA1
POWER
①
Top view of the
IV-S30EA1
Side view of the
IV-S30EA1
Converter connector
Camera 1 connector:
CAMERA 1
Camera 2 connector:
CAMERA 2
①
②
Side view of the
IV-S33M
Camera 1 connector
Camera 2 connector
Main interface cable
(comes with the
IV-S30EA1)
1 2
Top view of the
IV-S33M
45
250
45
54
(Unit: mm)
21