User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
5-29
Connection and Installation Methods
5
(2) Installation of the camera head
1 Put the camera head through the bracket (supplied with the IV-S30C2/C4) from the cable side
and slide the camera head into position.
2 Secure the camera head bracket using the M3x6 screws that come with the IV-S30C2/C4.
3 Secure the camera head assembly in place using the mounting hole (ø3.4) on the camera head
bracket.
Note: The camera head bracket supplied with the camera is for simple installations and is not
vibration-damping. To meet specific needs, the user may have to make a specialized bracket.
• External dimensions of the camera head bracket
Camera head bracket
(accessory)
Installed position of
the camera head
Lens
(commercially available)
Camera head
Screws
(M3 x 6:
accessory)
Mounting hole
(φ3.4: For securing the
camera assembly in place)
Front view Side view
Installation surface
Installation surface
(Shape before installation)
7 to10
6.5
φ
15.9
M3 hole
φ
3.4
φ
3.4
φ
3.4
31.4
20.8
27.9
0.4
(Unit: mm)