User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
5-11
5
Connection and Installation Methods
5-2 Installing, connecting and wiring the IV-S31M/S32M/S33M controller
[1] Connecting equipment to the controller
Connect the cameras (up to 2 cameras), remote key pad, and monitor to the controller (IV-S31M/S32M/
S33M).
1 Connect the camera cable (IV-S30KC3/S30KC5/S30KC7) connector or a connector of the main
housing connection cable (IV-S30EA1) to the camera 1 (CAMERA1) and camera 2 (CAMERA2)
connectors on the controller.
Note: Only connect or disconnect the camera connectors while the power is OFF.
The main housing connection cable (IV-S30EA1) can be connected to the IV-S33M only.
- Push the convex side of the connector into the concave side of the mating connector. When the
connector is all the way on, it clicks.
- To disconnect the connector, hold the plug of the connector, and pull it straight out.
- A camera connected to the camera 1 connector (CAMERA1) is treated as camera 1 by this
system, and a camera connected to the camera 2 connector (CAMERA2) is treated as camera
2.
- You must have a camera connected to the camera 1 connector.
2 Plug the remote key pad (IV-S30RK1) connector into the remote keypad connector (REMOTE) on
the controller.
Monitor connector (VIDEO)
Camera 2 connector (CAMERA2)
Camera 1 connector (CAMERA1)
Remote key pad
connector
(REMOTE)
Remote keypad
Controller
(side view)
Controller
(plan view)
3
IV-S3＊M
OUTPUT
INPUT
POWER
Y7Y0 Y1 Y2 Y3 Y4 Y5 Y6
COM
COM
+24V
X7X0 X1 X2 X3 X4 X5 X6
READY
0V
VIDEO
CAMERA1
CAMERA2
USB
RS232C/RS422
REMOTE
Camera 2
2
4
1
1
Camera 1
4
Moniter