User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
5-10
5
Connection and Installation Methods
(Vertical size x Horizontal size x Diagonal size) mm
14" monitor magnification
1/3" viewing field
Magnification
×0.14
×0.16
×0.18
×0.2
×0.3
×0.5
×0.75
×0.8
×1
×2
×4
×4.5
×6
×8
×10
×12
25×27×36.6
22×23×32.2
20×21×29.2
18×19×26.3
12×13×17.5
7.2×7.7×10.53
4.8×5.1×7.02
4.5×4.8×6.58
3.6×3.8×5.26
1.8×1.9×2.63
0.9×0.96×1.316
0.8×0.85×1.170
0.6×0.64×0.877
0.45×0.48×0.658
0.36×0.38×0.526
0.3×0.32×0.439
8.3
9.4
10.6
11.8
17.8
29.6
44.4
47.4
59.3
118.6
237.2
266.8
355.8
474.4
593
711.6
Table of magnifications and viewing size