User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
5-4
5
Connection and Installation Methods
[3] Optimum lens and resolution
The optimum lens for your system can be selected, based on the camera installation distance and the
field of view (workpiece size).
• When the IV-S30C1/C3 camera is used
• When the IV-S30C2/C4 camera is used
Lens
Lens
Lens holder
Close-up shot ring
Workpiece
Workpiece
View (mm)
Rounded surface of camera body
Camera installation
distance (mm)
(Horizontal
direction)
Vertical direction
Vertical direction
Horizontal direction
IV-S30C1/C3
Workpiece
Workpiece
View (mm)
Camera installation
distance (mm)
(Horizontal
direction)
Vertical direction
Vertical
direction
Horizontal
direction
Lens
(commercially available)
Lens
(commercially available)
Dented part
Lens rear end
IV-S30C2/C4
A dented side is the
vertical (upper)
direction.
IV-S30C2/C4 camera head