User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
9-19
9
Operation Examples (Standard menu: Positional deviation measurement)
1
2
2
3
3
4
5
1
[FINAL OUTPUT COND]
1PAGE NO.
0(0~7) NO YES
2
SET POSITION MOVE
3
INPUT SIGNAL
AUX-RLY C112(0~127) EXT-INP X0(0~7)
TMR TM0(0~7) CNTR CN0(0~7)
AN00(0~15) OUT Y00(0~15)
4LOGIC SYMBOL DEL
5
OUTPUT SIGNAL
OUT Y00(0~15) AUX-RLY C000(0~127)
TMR TM0(0~7) SET-VL000(000~999)
CNTR CN0(0~7)
SET-VL000(000~999)
DEL
OPS-MENU RETURN LOCK
[PAGE0]
INPUT0
LOGIC
INPUT1
LOGIC
INPUT2
LOGIC
INPUT3
LOGIC
10 234567OUT
[PAGE0]
INPUT0
LOGIC
C112
01234567
Y00
C112
01234567
[PAGE0]
INPUT0
LOGIC
OUTPUT
OUTPUT
(10) Setting the final evaluation output condition
1. Move the cursor to "1PAGE.NO." (register number) and press the SET key. Move the cursor to YES
and press the SET key.
- The items 2 to 5 will be displayed.
2. Move the cursor to "2SET POSITION" (position to set) and press the SET key.
- Move the cursor to the 0th column of INPUT 0 for logic setting using the up, down, left and right keys,
and press the SET key.
3. Move the cursor to "3INPUT SIGNAL" and press the SET key.
- Select AUXRLY C000 (0 to 127) with the left and right keys, change the setting to "C112" with the up
and down keys, and press the SET key.
- A logic symbol will be displayed in the 0 column of INPUT 0.
4. Move the cursor to "5OUTPUT SIGNAL" and press the SET key.
- Select OUT.Y00 (0 to 15) with the left and right keys. Specify Y00 with the up and down keys, and
press the SET key.
- A symbol indicating an output coil for INPUT 0 will be displayed.
5. Move the cursor to the "RETURN" item using the up/down and left/right keys. Then press the SET key.
- The screen will return to the [TYPE MEAS COND] menu.
To the next page
Continued from the previous page