User`s manual

9-18
Operation Examples (Standard menu: Positional deviation measurement)
9
(9) Setting the position evaluation conditions
1. Move the cursor to the "1REGISTER NO." item using the up and down keys, and press the SET
key. Select "0" using the up and down keys, and press the SET key.
2. Move the cursor to "6MATCH LVL (MDL0)" and press the SET key.
3. Move the cursor to the lower limit position with the left and right keys, and press the SET key.
- Select the digit to change with the left and right keys, and then set the value to +09000 with the up
and down keys.
(Criteria for a successful match: 90.00% to 100.00%)
- After specifying the lower limit value, press the SET key, and then the ESC key.
4. Move the cursor to the bottom line using the up and down keys, and select the "RETURN" item using
the left and right keys. Then press the SET key.
- The screen will return to the gray scale search menu.
5. Move the cursor to the bottom line using the up and down keys, and select the "RETURN" item using
the left and right keys. Then press the SET key.
-The screen will return to the [TYPE MEAS COND] menu.
6. Press the ESC key three times.
7. Move the cursor to the "FINAL-OUTPUT" item using the up/down and left/right keys. Then press the
SET key.
- The [FINAL OUTPUT COND] menu will be displayed.
To the next page
Continued from the previous page
[EVALUATION COND]
①REGISTER NO. 0(0~7) [TEST RESULT] [OUTPUT] 
②CONDITION SET RESET AUTO(
± 10%)
③X COORD.(MDL0) 000.0~511.0 X0= NO
④Y COORD.(MDL0) 000.0~479.0 Y0= NO
⑤x DEVIATE(MDL0) -511.0~+511.0 x0= NO
⑥y DEVIATE(MDL0) -479.0~+479.0 y0= NO
⑦MATCH LVL(MDL0) -10000~+10000 M0= NO 

OPS-MENU
RETURN
LOCK


4
7
1
2
3
⑦MATCH LVL(MDL0) +09000~+10000
[TYPE MEAS COND]
① OBJECT TYPE NO. 00(0~63) NO YES
②SELECT CAMERA CAM1&2 CAM1&NG-IMG
③
IMG PRE-PROCESS (TO NEXT SUB-MENU)
OPS-MENU SAVE LOCK TITLE FINAL-CALC FINAL-OUTPUT I/O SYSTEM