User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
1-5
Outline
1
1-2 Controller
[1] Software version of the controllers
This manual describes the controllers (IV-S31M/S32M/S33M) and their respective software versions
below.
[2] Differences between types of controllers
The controller models (IV-S31M/S32M/S33M) have the following specifications.
("
": Compatible/available, "-": Not compatible/unavailable)
* The gray search times given above are true when the search area is 256 x 256 pixels, the
model is 64 x 64 pixels, and the contraction value is set to 3.
For other specifications, see pages 8-1 to 8-3 in “Chapter 8: Specifications.”
[3] Upgrade details
(1) IV-S33M
This manual describes the IV-S33M using software version V1.01.
The upgrade details (functions added to version V1.00) for the IV-S33M software (system program)
are as follows.
Newly added functions in software version V1.01 (compared with V1.00)
rellortnoC noisreverawtfoS
M13S-VI20.2V
M23S-VI20.2V
M33S-VI10.1V
metI M13S-VI M23S-VI M33S-VI
deldnahsepyttcejboforebmuN612346
/segamiecnereferforebmunmumixaM
segamiforebmunlatot
3/0038/0068/006
*emithcraesyarGsm81sm21sm9
gnitcennoC
aremac
)1C03S-VI(aremacdradnatS
)2C03S-VI(aremacorciM
)3C03S-VI(aremacdeeps-hgiH--
-VI(aremacdeeps-hgih,orciM
)4C03S
--
yllaicremmoc(aremacAIE
)elbaliava
--
ehtnosegamiaremacowtfoyalpsidtilpS
neercsehtfosedisthgirdnatfel
--
derotsebnactahtsegamiGNforebmuN
)segami821mumixaM(
-
remit/radnelaC-
noitcepsniPSC/AGB-
lanimrettupnI
kcolb
degnahcebepyttcejbO4Xot1X5Xot1X6Xot1X
tupnilanretxE7Xot5X7X,6X7X
noitpmusnocrewoPW7W7W7
metI noitcnufdeddA
tnemerusaemGNnotlaH
"ehtnodeddaneebsah")yalpsidtnemerusaemGN(ON" 2 TLAH
.unem".SYSEPYTTCEJBO"ehtnienil"SAEMGNNO
neercsyalpsidegamiGN
neercseht,"2&1MAC"ottessiTUPTUOROTINOMehtnehW
ottxen)2C:2aremaC,1C:1aremaC(rebmunaremacehtsyalpsid
.neercsyalpsidtnemerusaemeht
tuptuoebortS
nehwelbaliavawonsituptuoebortsa,neercsgnittesehtnO
"(.egamicitatsaotegamicimanydamorfgnihctiws 6 EBORTS
]SNOITIDNOCO/I[no"TUO
For details about using the added functions (standard menu), see the “IV-S30 (IV-S31M/S32M/
S33M) User’s Manual, Function and Operation”