User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
1-4
Outline
1
• Measure a large number of object types: the IV-S30 can register up to 64 object types
The IV-S30 can keep track of more than one set of measurement conditions. The shape of an object, its
position and your desired measurements are all programmable. Therefore, it can be used on a produc-
tion line that produces multiple, slightly or greatly different models.
(IV-S33M: Maximum 64 items, IV-S32M: Maximum 32 items, IV-S31M: Maximum 16 items)
• Integrated micro PC function
The IV-S30 has a micro PC function that allows it to determine unknown values by calculating the in-
spected and measured results and then output signals to lamps and plungers. You can construct a
complete, simple inspection process with a single controller.
• Displays and transfers NG images while measurements are being made (IV-S32M/S33M)
The IV-S33M can check an NG image history (up to 128 images) while measuring, or simultaneously
display a measured image and an NG image by splitting the screen. While measuring, the controller can
send NG images over the USB bus (12 Mbps) to a personal computer at high speed (approximately 7
seconds per image). Since you can collect and analyze NG images in real time, the NG rate can be
decreased by finding the cause and making corrections immediately.
(The IV-S32M can display NG images when measurements are stopped.)
Measurement conditions
Workpiece
Monitor display
Split-screen display
Display NG images
Display measured image
Up to 128 NG
images can be
stored
High-speed data transfer
to a personal computer
Displays switchable
according to the meas-
urement conditions