User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
9-4
Operation Examples (Simplified menu: Positioning measurement)
9
2
5
3
1
3
MATCH LVL(MDL0)
-10000~+10000
1X COORD.(MDL0) 000.0~511.0 X0=253.0 OK
2Y COORD.(MDL0) 000.0~479.0 Y0=220.0 OK
3
MATCH LVL(MDL0)
+09000~+10000 M0=+09620 OK
To the next page
Continued from the previous page
(7) Setting the position evaluation conditions
1. Move the cursor to the "POSI-EVAL." item on the MAIN OPS MENU using the left and right keys,
and press the SET key.
- The items 1 to 3 will be displayed.
2. Move the cursor to "3MATCH LVL (MDL0)" with the up and down keys, and press the SET key.
3. Move the cursor to the minimum value position with the left and right keys, and press the SET key.
- Select the digit to change with the left and right keys, and then set the value to +09000 with the up
and down keys.
(Criteria for a successful match: 90.00% to 100.00%)
- After defining the minimum value, press the SET key, and then the ESC key.
4. Press the TRG/BRT key.
- The measurement (evaluation) results for items 1 to 3 and the image will be displayed.
5. Press "ESC," and move the cursor to the "CHG-TYPE" item using the left and right keys, to confirm
that "Object type number 00" has been selected.
6. Move the cursor away from the "CHG-TYPE" item using the left and right keys.
Measurment result
Evaluation result
F.IMG C1 L
VX.XX
(TYPE00)
MEAS XXXXms 2000-08-01 10:30
MEASURE 0 CAM1 POSITIONING
CHG-TYPE
POSI-COND
POSI-EVAL. SEL-CAMERA
OPS-CND
SYS-CND
ADJ-CONTRAST
SAVE
SHUTTER
X0~7 Y0~7 READY
①X COORD.(MDL0) 000.0~511.0 X0=
②
Y COORD.(MDL0) 000.0~479.0 Y0=
③
MATCH LVL(MDL0)
-10000~+10000 M0=