User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index
7-31
Simplified Menu Operation
7
[6] Camera setting (IV-S33M)
Select the camera type (standard, high-speed, or EIA) that is connected to the controller.
- When "HIGH SPEED" or "EIA" is selected, choose the image capture mode.
* The "Full + half" mode can only be selected when the camera type is set to "HIGH SPEED"
For more image capture time and processing details, see the next page.
- When "EIA" is selected, you must select a camera synchronization mode (External or Internal).
For details about camera synchronization, see page 6-8.
noitcelesaremaC sliateD
dradnatS
detcennocsi)2C03S/1C03S-VI(aremacdradnatss'PRAHSnehwtceleS
.M33S-VIehtot
deeps-hgiH
detcennocsi)4C03S/3C03S-VI(aremacdeeps-hgihs'PRAHSnehwtceleS
.M33S-VIehtot
AIE
)ralimisro57-CXynoS(aremacAIEelbaliavayllaicremmocanehwtceleS
.M33S-VIehtotdetcennocsi
edomnoitazinorhcnysaremacehttesotevahoslauoy,esacsihtnI
.)lanretnIrolanretxE(
On the MAIN OPS MENU screen, move the cursor to the "SYS-CND" item and press the SET key.
- On the [SYSTEM COND] menu, move the cursor to , "8CAMERA TYPE", and press the SET key.
[SYSTM COND]
①SERIAL OUTPUT NO PC-LINK SERIAL
⑧CAMERA TYPE (TO NEXT SUB-MENU)
[CAMERA SET]
①SELECT CAMERA STANDARD HIGH SPEED EIA
OPS-MENU
OPS-MENU RETURN LOCK
» To select the "STANDERD" camera settings
» To select the "EIA" camera settings
①SELECT CAMERA STANDARD HIGH SPEED EIA
②SYNCHRONIZE CAM EXTERNAL SYNCH INTERNAL SYNCH
③CAPURE IMG MODE FULL HALF
» To select the "HIGH SPEED" camera settings
①SELECT CAMERA STANDARD HIGH SPEED EIA
②CAPTURE IMG MODE FULL HALF FULL+HALF
edomerutpacegamI sliateD
lluFegamiehtnisenilehtllanacS
flaHegamiehtnisenilddoehtylnonacS
*flah+lluF
eraseniltegrattnemerusaemeht,edomegamilaitrapehtnI
edomflahnidennacserasrehtoehtdnaedomllufnidennacs