User`s manual
Table Of Contents
- Safety Precautions
- Table of contents
- Chapter 1: Outline
- 1-1 Features
- 1-2 Controller
- 1-3 Measurement program
- [1] Positional deviation measurement
- [2] Degree of match inspection
- [3] Lead inspection
- [4] BGA/CSP inspection (IV-S32M/S33M)
- [5] Area measurement by binary conversion
- [6] Object counting by binary conversion
- [7] Object identification by binary conversion
- [8] Point measurements
- [9] Distance and angle measurement
- [10] Multiple position measurement (IV-S33M)
- [11] Multiple degree of match inspection (IV-S33M)
- Chapter 2 : Precautions for Use
- Chapter 3 : System Configuration
- Chapter 4 : Part Names and Functions
- Chapter 5 : Connection and Installation Methods
- Chapter 6 : Setting and Operating Outlines
- Chapter 7 : Simplified Menu Operation
- 7-1 Operation screen
- 7-2 Image display
- 7-3 Setting functions that are different with each controller
- 7-4 Setting procedures
- 7-5 Setting the operation conditions
- 7-6 Setting object types
- 7-7 Setting the shutter speed
- 7-8 Setting the positioning conditions
- 7-9 Setting the existence inspection conditions
- 7-10 Measurement triggering
- 7-11 Saving data
- 7-12 Specify the system conditions
- Chapter 8 : Specifications
- Chapter 9 : Operation Examples
- Glossary
- Appendix
- Alphabetical Index

7-27
Simplified Menu Operation
7
7-12 Specify the system conditions
This section describes how to set the communication conditions and system time.
[1] Communication setting
When you want to use general-purpose serial communication or computer link communication, you must
set the communication conditions.
- Specify each item so that it will match the communication parameters of the target machine that you will
communicate with.
- For details about general-purpose serial port communications and computer link communications, see
the IV-S30 User’s Manual (Function and Operation).
Move the cursor to the "SYS-CND" item on the menu bar of the MAIN OPS MENU, and press the SET key.
F.IMG C1 H
[SYSTEM COND]
①SERIAL OUTPUT NO PC-LINK SERIAL
②COMM.SET (TO NEXT SUB-MENU)
③COMPUTER LINK (TO NEXT SUB-MENU)
④INITIALIZATION ALL-INIT INIT-RAM
⑤SIMPLE→SEL MENU EXEC
⑥SELF DIAGNOSTICS EXEC
⑦TIME 2000Y 08M 01D 10H 30M
⑧CAMERA TYPE (TO NEXT SUB-MENU)
OPS-MENU
Move the cursor to the "2 COMM. SET" item on the
[SYSTEM COND] menu, and press the SET key.
[SYSTEM COND]
1SERIAL OUTPUT NO PC-LINK SERIAL
2COMM.SET
(TO NEXT SUB-MENU)
3
COMPUTER LINK
(TO NEXT SUB-MENU)
[SET COMM PARMS]
①
COMM.STANDARD
RS232C RS422(4-W 2-W)
②
BAUDRATE(kbps)
2.4 4.8 9.6 19.2 38.4 57.6 115.2
③
NO. OF DATA BITS
7 8BITS
④
PARITY CHECK
EVEN ODD NO
⑤
NO. OF STOP BITS
1 2BITS
⑥
STATION NO.
00(0~7F)
OPS-MENU RETURN LOCK
uneM sliatedgnitteS segapecnerefeR
1 TUPTUOLAIRES
noitacinummocehtgnittesrofunemtuptuolairesehtesU
esoprup-larenegehtrofroknilretupmocehtrofsretemarap
.tropnoitacinummoclaires
62-7
2 TES.MMOC
unem]SMRAPMMOCTES[eht,metisihttcelesuoynehW
ehtyficepsnacuoY.neercsrewolehtnodeyalpsideblliw
.snoitidnocnoitacinummoc
72-7
3 KNILRETUPMOC
lliwunem]KNILRETUPMOC[eht,metisihttcelesuoynehW
ehtyficepsnacuoY.neercsrewolehtnodeyalpsideb
.snoitidnocnoitacinummocknilretupmoc
82-7
4 NOITAZILAITINI
.)llaezilaitinI(MARehtdnayromemhsalfehtsezilaitinI 92-7
5 UNEMELPMIS
- DTS
tceles(neercsnoitcelesunemehtotegnahclliwneercsehT
.)sunemdradnatsrodeifilpmiseht
5-6
6 SCITSONGAIDFLES
gnitareposierawdrahs'03S-VIehttonrorehtehwskcehC
.yllamron
03-7
7 EMIT
.desusiM33S/M23S-VInehwemitehtteS 03-7
8 EPYTAREMAC
sitahtepytaremacehttceles,desusiM33S-VIehtnehW
.)AIEro,dradnats,deeps-hgih(detcennoc
13-7