User`s manual

7-20
Setting Examples Using the Set Wizard
7
= In this example, the settings on the STEP 7 (COMPARE MEASUREMENT SETTINGS) to STEP 7
(MAIN OPS MENU) are not changed. Select "NEXT" on each of these screens to go to the next
screen.
=
STEP7 STEP7
CALCULATE SETTINGS FOR ALL
MEASUREMENT RESULTS(YES/NO)
CHANGE DISPLY CONTENTS OF
THE MAIN OPS MENU
ADD MEASUREMENT CONDITIONS?
RETURN NEXT
RETURN NEXT
RETURN NEXT
RETURN NEXT
RETURN NEXT
STEP7
1
NO ■
2
YES(MEAS) □
STEP7
1
NO ■
2
YES □
STEP7
1
NO ■
2
YES □
STEP7
1
NO ■
2
COMPUTER LINK □
3
SERIAL I/F □
1
NO ■
2
YES(MEAS) □
3
YES(DST&AGL) □
1
NO ■
2
YES(MEAS) □
3
YES(DST&AGL) □
STEP7
1
NO ■
2
YES □
Settings for measurement results.
- For details, see Chapter 19 in
Function and Operation.
Settings for measurement conditions.
- For details, see page 3-1 in
Function and Operation.
Settings for the calculations applied
to all measurements.
- For details, see Chapter 19 in
Function and Operation.
Settings of interface to output results.
- For details, see Chapter 22 and 23
in Function and Operation.
Settings for displaying the
operation screen.
- For details, see page 6-14 of
this manual.
Settings for the calculations applied
to all measurements.
- For details, see Chapter 19 in
Function and Operation.
Output settings.
- For details, see Chapter 22 in
Function and Operation.
LADDER CIRCUIT AND RESULT
OUTPUT BASED ON MEASUREMENT
AND CALCULATION RESULT (YES/NO)
COMPARE MEASUREMENT
SETTINGS TO MEASUREMENT
RESULTS (YES/NO)
SELECT AN INTERFACE FOR
OUTPUTTING RESULTS WHEN THE
INPUT IS THE PARALLEL I/F
SET LADDER CIRCUIT RESULT
OUTPUT BASED ON ALL
MEASUREMENT AND CALCULATION
RESULTS (YES/NO)
RETURN NEXT
RETURN NEXT