User`s manual

7-19
Setting Examples Using the Set Wizard
7
(12) Select whether or not to set the evaluation
conditions for measured results.
Select " YES" and press the SET key.
The "DETAIL" item will appear on the lower part
of the screen. Move the cursor to "DETAIL" and
press the SET key.
The "EVALUAT COND" screen will appear.
Select " REGISTER NO." using the up and
down arrow keys. Change the number to "0"
using the up and down arrow keys. Then press
the SET key.
Select " CONDITION SET" and " MAX-
GRAYS-DIFF" using the up and down arrow keys,
and enter upper and lower limit values. Use the
left and right arrow keys to change between each
digit and use up and down arrow keys to change
values of each digit.
For example, when selecting " MAX-GRAYS-
DIFF," press the SET key and then move the
cursor to the "OUTPUT" column using the left and
right arrow keys. Now, press the SET key, a
popup menu appears. From this popup menu,
select output destination from "NO," "Y," and "C."
* "Y" is for terminal block. "C" is for auxiliary relay.
Move the cursor to "Y" and press the SET key.
Then select the Y0 and press the SET key. Now
the evaluation results will be output to the Y0
terminal.
For details about the evaluation conditions,
see page 3-28 in Function and Operation.
After the settings are complete, press the ESC key to return to the "SET WIZARD" screen.
STEP6
COMPARE EVALUATION
CONDITIONS TO MEASUREMENT
RESULT (YES/NO)
1 NO □
2
YES ■
RETURN NEXT DETAIL
TYPE00
Start
STEP1：PARALLEL＋SERIAL＋USB
STEP2：
CAPTURE IMG/PARTIAL-IMG
STEP3：MEAS1/CAM1
STEP4：MEAS1/F/INSPECT NG
STEP5：MEAS1/MEAS COND
STEP6：MEAS1/EVALUATION
End
COLOR F C1 BRTSET WIZARD EXIT
[SAMPLE]
1
REGISTER NO. 0 (0∼7) [TEST RESULT] [OUTPUT]
2
CONDITION SET AUTO (–10%)
3
MAX-GRAYS-DIFF 000. 0 ∼255. 0 SG= NO
4
MAX-GRAYS 000. 0 ∼255. 0 MXG= NO
5
MIN-GRAYS 000. 0 ∼255. 0 MNG= NO
6
TEST EXEC (WITH-POSI. ADJ WITHOUT-POSI. ADJ)
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F C1 BRT
EVALUAT COND SCREEN COND SAVE EDIT SEL
1
REGISTER NO. 0 (0∼7) [TEST RESULT] [OUTPUT]
2
CONDITION SET AUTO (±10%)
3
MAX-GRAYS-DIFF 000. 0 ∼255. 0 SG=066.6 OK NO
4
MAX-GRAYS 000. 0 ∼255. 0 MXG=137.8 OK NO
5
MIN-GRAYS 000. 0 ∼255. 0 MNG=054.5 OK NO
6
TEST
SET=VALUE INPUT ESC=BACK SEL=CHNG IMG TRG=FUNC
RED F C1 BRT
EVALUAT COND SCREEN COND SAVE EDIT SEL
Y OUTPUT
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Use place
NO
NO
NO
NO
NO
NO
NO
NO
NO
Y
C