User`s manual

7-16
Setting Examples Using the Set Wizard
7
= In this example, the settings on the screens are not changed. Select "NEXT" on each of these
screens to go to the next screen. =
(10) Select a registration number
Move the cursor to " REGISTER NO. (0 ~ 7)" and
press the SET key. While this item is highlighted,
press the up and down arrow keys and press the
SET key when the number you want appears.
Next, move the cursor to " PROXIMITY
DIFFERENC" on the "SELECT AN INSPECTION
MODE" line and press the SET key.
The "DETAIL" item will appear in the lower menu.
Move the cursor to "DETAIL" and press the SET
key.
Now "REG COND" screen will appear.
STEP5
1 REGISTER NO. (0∼7) 0
SELECT AN INSPECTION MODE
1 NO □
2
PROXIMITY DIFFERENC ■
2
TOTAL DEFFERENCE □
RETURN NEXT DETAIL
TYPE00
Start
STEP1：PARALLEL＋SERIAL＋USB
STEP2：
CAPTURE IMG/PARTIAL-IMG
STEP3：MEAS1/CAM1
STEP4：MEAS1/F/INSPECT NG
STEP5：MEAS1/MEAS COND
End
COLOR F C1 BRTSET WIZARD EXIT
[SAMPLE]
Select whether or not to process the captured image.
Calculation between images - See page 3-30 in Function and Operation
Density conversion - See page 3-33 in Function and Operation
Space filter - See page 3-34 in Function and Operation
STEP5
SELECT TYPE OF CALCULATION
BETWEEN IMAGES
1
COMPARE IMG NO
SELECT WHETHER OR NOT TO
CONVERT IMAGE DENSITY
1
CHING GRAY LEVEL NO
SELECT FILTER TYPE FOR
IMAGE DATA
1
SPACE FILTER NO
RETURN NEXT