User`s manual

7-15
Setting Examples Using the Set Wizard
7
(7) Select an image-processing method
Move the cursor to " COLOR FILTER" and
press the SET key.
Next move the cursor to "COLOR FILTER SET"
using the up and down arrow keys and press the
SET key. Select "DETAIL" to enter the "COLOR
FILTER SET" screen.
(8) On the " FILTER TYPE" item, select a filter from
the popup menu.
After the settings are complete, press the ESC key to return to the "SET WIZARD" screen.
(9) Move the cursor to the " MEAS SEL" line using
the up and down arrow keys, and press the SET
key. Select "INSPECT NG" from the popup
menu. Then, select "NEXT" to move to the next
screen.
STEP4
SELECT A COLOR IMAGE
PROCESSING MODE
1 COLOR FILTER ■
2
EXTRACT COLOR □
COLOR FILTER SET
DETAIL
SELECT A MEASUREMENT TYPE
1 MEAS SEL NO
RETURN NEXT
TYPE00
Start
STEP1：PARALLEL＋SERIAL＋USB
STEP2：
CAPTURE IMG/PARTIAL-IMG
STEP3：MEAS1/CAM1
End
COLOR F C1 BRTSET WIZARD EXIT
[SAMPLE]
1
FILTER TYPE RED
COLOR F C1 BRT
COLOR FILTER SET SCREEN COND SAVE
RED
GREEN
BLUE
BRIGHT LEV
ANY
STEP4
SELECT A COLOR IMAGE
PROCESSING MODE
1 COLOR FILTER ■
2
EXTRACT COLOR □
COLOR FILTER SET
DETAIL
SELECT A MEASUREMENT TYPE
1 MEAS SEL INSPECT NG
RETURN NEXT
TYPE00
Start
STEP1：PARALLEL＋SERIAL＋USB
STEP2：
CAPTURE IMG/PARTIAL-IMG
STEP3：MEAS1/CAM1
STEP4：MEAS1/F/INSPECT NG
End
COLOR F C1 BRTSET WIZARD EXIT
[SAMPLE]
NO
POSI-DEVIATION
CHK-DEG-MATCH
INSPECT-LEAD
INSPECT-BGA/CSP
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
POINT-MEAS
MULTI-POSI
MULTI MATCHES
INSPECT NG
RED Displays red areas more brightly.
GREEN Displays green areas more brightly.
BLUE Displays blue areas more brightly.
BRIGHT LEV
Displays areas that are within the specified brightness range (within
the specified upper and lower limits) more brightly.
ANY
Specify the optimum color filter parameters to use, based on the
original image conditions.