User`s manual

7-12
Setting Examples Using the Set Wizard
7
(14) The sample is registered with the title you assigned to on the
"SET WIZARD" screen.
Note 1: If no title was assigned, the sample settings are simply
listed as "Sample *"
Note 2: A maximum of eight sample settings can be assigned.
(15) The monitor will return to display the operation screen.
To return to the operation screen, press the ESC key twice, or move the cursor to "SCREEN" in the
upper menu area using TRG/BRT key and select "OPS-MENU" from the popup menu.
(16) Execute a measurement.
While the operation screen is displayed, press the TRG/BRT key. The measurement results will be
displayed on the screen.
*1 The final evaluation result will be displayed as "OK" in the upper left corner of the screen when all
of the items have been evaluated acceptable.
If there is a single unacceptable item, "NG" will be displayed.
*2 When the final evaluation result is OK, Y0 is turned ON, and a filled box is displayed. (When the
result is NG, an empty box is displayed.)
TYPE00
Start
End
SCREEN SAVE DEL
SET WIZARD
[
SAMPLE
]
1 CHG-TYPE
2 STANDARD WIZARD
3 OPERATION CHART
4 AREA
OPS-MENU
RETURN
Register as a sample
COLOR F C1 BRT
V3. 03C
(TYPE00) AAA
12: MEASURE 0 CAM1
OK
MEAS 0019ms 2002-02-04 16:13
MEASUREMENT 1 COLOR EVALUATION
REGISTER NO. 0 (0∼7）
A=
H=
S=
CM=
MNU-CHG MAIN-COND CHG-MEA COND-CHG CHNG-REG SCREEN-CHG CHG-TYPE
X0∼7
Y0∼7
READY
Final evaluation result (*1)
Measuring time
Registration number
Measured binary area
Hue
Saturation (chroma)
Color degree of match