User`s manual

7-10
Setting Examples Using the Set Wizard
7
= In this example, the settings on the STEP8 (COMPARE MEASUREMENT SETTINGS) to STEP
78 (MAIN OPS MENU) are not changed. Select "NEXT" on each of these screens to go to the
next screen. =
STEP8 STEP8
CALCULATE SETTINGS FOR ALL
MEASUREMENT RESULTS(YES/NO)
CHANGE DISPLY CONTENTS OF
THE MAIN OPS MENU
ADD MEASUREMENT CONDITIONS?
RETURN NEXT
RETURN NEXT
RETURN NEXT
RETURN NEXT
RETURN NEXT
STEP8
1
NO ■
2
YES(MEAS) □
STEP8
1
NO ■
2
YES □
STEP8
1
NO ■
2
YES □
STEP8
1
NO ■
2
COMPUTER LINK □
3
SERIAL I/F □
1
NO ■
2
YES(MEAS) □
3
YES(DST&AGL) □
1
NO ■
2
YES(MEAS) □
3
YES(DST&AGL) □
STEP8
1
NO ■
2
YES □
Settings for measurement results.
- For details, see Chapter 19 in
Function and Operation.
Settings for measurement conditions.
- For details, see page 3-1 in
Function and Operation.
Settings for the calculations applied
to all measurements.
- For details, see Chapter 19 in
Function and Operation.
Settings of interface to output results.
- For details, see Chapter 22 and 23
in Function and Operation.
Settings for displaying the operation
screen.
- For details, see page 6-14 of this
manual.
Settings for the calculations applied
to all measurements.
- For details, see Chapter 19 in
Function and Operation.
Output settings.
- For details, see Chapter 22 in
Function and Operation.
LADDER CIRCUIT AND RESULT
OUTPUT BASED ON MEASUREMENT
AND CALCULATION RESULT (YES/NO)
COMPARE MEASUREMENT
SETTINGS TO MEASUREMENT
RESULTS (YES/NO)
SELECT AN INTERFACE FOR
OUTPUTTING RESULTS WHEN THE
INPUT IS THE PARALLEL I/F
SET LADDER CIRCUIT RESULT
OUTPUT BASED ON ALL
MEASUREMENT AND CALCULATION
RESULTS (YES/NO)
RETURN NEXT
RETURN NEXT