User`s manual

7-8
Setting Examples Using the Set Wizard
7
REFERENCE COLOR
Select the reference color number that was
registered in the color extraction. (In this example
select 0.)
MEAS SHAPE
Move the cursor to this line and press the SET
key. A popup menu will appear.
Move the cursor to "RECTANGLE", "CIRCLE" or
"ELLIPSE" and press the SET key. In this
example, select "RECTANGLE."
MEAS AREA
Move the cursor to this line and press the SET
key. The "SET" line will be highlighted. Press the
SET key again and the "RECTANGLE" setting
screen will appear.
Adjust the size of the rectangle by setting
" UP.L" and " LO.R" (upper left and lower
right corners) in order to establish the reference
image area.
1
REGISTER NO 0 (0∼7)
2
DEFERENCE COLOR 0 (0∼7)
3
MEAS SHAPE RECTANGLE
4
MEAS AREA SET (224, 208)∼(287, 271)
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR F C1 BRT
REG COND SCREEN COND SAVE DETAIL
RECTANGLE
CIRCLE
ELLIPSE
1
UP. L (224,208)
2
LO. R (287,271)
3
MOVE
SET=SELECT A MENU ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR F C1 BRT
RECTANGLE RESET RETURN
X:248 Y:232
UP.L
The upper left corner of the rectangle can be moved up, down, left, and right.
LO.R The lower right corner of the rectangle can be moved up, down, left, and right.
MOVE
The rectangle can be moved up, down, left, and right. Select "3MOVE" and
press the SET key to display a cross hair cursor on the screen. Now, move
the rectangle by pressing the up, down, left, and right arrow keys. When it is
in position, press the SET key to confirm it.