User`s manual

7-6
Setting Examples Using the Set Wizard
7
= In this example, the settings on the screens are not changed. Select "NEXT" on each of these
screens to go to the next screen. =
(9) Select a registration number
Move the cursor to " REGISTER NO. (0 ~ 7)" and
press the SET key. While this item is highlighted,
press the up and down arrow keys and press the
SET key when the number you want appears.
Next, move the cursor to " YES" on the "SELECT
REGISTRATION (YES/NO)" line and press the SET
key.
The "DETAIL" item will appear in the lower menu.
Move the cursor to "DETAIL" and press the SET key.
Now "REG COND" screen will appear.
COLOR F C1 BRTSET WEZARD EXIT
[SAMPLE]
STEP6
1
REGISTER NO.（0∼7） 0
SELECT REGISTATION (YES/NO)
1
NO □
2
YES ■
RETURN NEXT DETAIL
TYPE00
Start
STEP1：PARALLEL+SERIAL+USB
STEP2：CAPTURE IMG/PARTIAL-IMG
STEP3：MEAS1/CAM1
STEP4：MEAS1/P/COLOR EVALUATION
STEP5：MEAS1/WINDOW/NORMAL
STEP6：MEAS1/MEAS CND
End
STEP5
SELECT WINDOW TYPE
1 NORMAL
1
BINARY-IMG-MASK
1
POLYGON
RETURN NEXT