User`s manual

7-5
Setting Examples Using the Set Wizard
7
Ex.: Change " START POINT" of hue.
Increase value of the " START POINT" of hue
and the start point of the hue and chroma
(saturation) graph moves. The center value also
changes accordingly.
Select " CENTR" and" END POINT" and
change numeric values so that each position can
be shifted.
By moving " CENTR," both start and end
points slide accordingly.
Note: To extract and covert to binary wider range
hue, set start and end points of hue wider.
Ex.: Change upper and lower limits of saturation
(chroma).
Increase or decrease values of " U.LM" and
" L.LM" for saturation, the upper and lower
limit range on the bar graph can be widen or
narrowed.
Moving the " CENTR," both upper and lower
limits slides accordingly.
After fine adjustment is complete, press the ESC
key three times to return to the "SET WIZARD"
screen.
(8) Next, move the cursor to the " MEAS SEL"
line using the up and down arrow keys, and
press the SET key. Select "COLOR EVALUA-
TION" from the popup menu. Then, select
"NEXT" to move to the next screen.
1
EXTRACT COLOR NO 0 (0∼7)
[HUE]
2
START POINT 080.0 (0∼359)
3
CENTR 250.0 (0∼359)
4
END POINT 060.0 (0∼359)
[CHROMA]
5
U. LM 130.0 (0∼255)
6
CENTR 120.0 (0∼255)
7
L. LM 110.0 (0∼255)
[BRIGHT LEVEL]
8
U. LM 130.0 (0∼255)
9
CENTR 120.0 (0∼255)
0
L. LM 110.0 (0∼255)
[COLOR DETECT]
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
COLOR F C1 BRT
FINE ADJUSUTMENT SCREEN SAVE
69: (EXT COL) REF COL NOT SET
1
EXTRACT COLOR NO 0 (0∼7)
[HUE]
2
START POINT 080.0 (0∼359)
3
CENTR 250.0 (0∼359)
4
END POINT 060.0 (0∼359)
[CHROMA]
5
U. LM 130.0 (0∼255)
6
CENTR 120.0 (0∼255)
7
L. LM 110.0 (0∼255)
[BRIGHT LEVEL]
8
U. LM 130.0 (0∼255)
9
CENTR 120.0 (0∼255)
0
L. LM 110.0 (0∼255)
[COLOR DETECT]
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
COLOR F C1 BRT
FINE ADJUSUTMENT SCREEN SAVE
69: (EXT COL) REF COL NOT SET
STEP4
SELECT A COLOR IMAGE
PROCESSING MODE
1 COLOR FILTER □
2
EXTRACT COLOR ■
COLOR EXTRACT SET
DETAIL
SELECT A MEASUREMENT TYPE
1 MEAS SEL COLOR EVALUATION
RETURN NEXT
TYPE00
Start
STEP1：PARALLEL＋SERIAL＋USB
STEP2：
CAPTURE IMG/PARTIAL-IMG
STEP3：MEAS1/CAM1
End
COLOR F C1 BRTSET WIZARD EXIT
[SAMPLE]
NO
MEAS-BIN-AREA
CNT-BIN-OBJ
LABEL-BIN-OBJ
COLOR EVALUATION
INSPECT COLOR SHADING
MEAS-CAM-POSI