User`s manual

7-4
Setting Examples Using the Set Wizard
7
Register extracted color
Select " REG" using the up and down arrow
keys and then press the SET key. From the
popup menu, select "NEW" or "ADD."
After the colors are registered, the
"REGISTRATION WAS COMPLETED"
message appears.
Press the SET key again, the selected area is
converted to binary, and this color is registered
as extraction color number 0.
Press the ESC key to return to the previous
screen.
FINE ADJUSTMENT
On " FINE ADJUSTMENT" line, press the
SET key to enter the sub-menu screen.
The screen shows "HUE," "CHROMA," (color
saturation) and "BRIGHT LEV" of the registered
extracted color with numeric values and graphs.
Dotted lines on each graph are upper and lower
limits, and the solid line is the center value.
adjust the upper and lower limit values.
1
UP. L (248,232)
2
LO. R (263,247)
3
MOVE
4
REG
SET=DECISION ESC=BACK SEL=CHNG IMG TRG=FUNC
COLOR F C1 BRT
RECTANGLE RESET RETURN
X:248 Y:232
NEW
ADD
UNDO
1
EXTRACT COLOR NO 0 (0∼7)
[HUE]
2
START POINT 080.0 (0∼359)
3
CENTR 250.0 (0∼359)
4
END POINT 060.0 (0∼359)
[CHROMA]
5
U. LM 130.0 (0∼255)
6
CENTR 120.0 (0∼255)
7
L. LM 110.0 (0∼255)
[BRIGHT LEVEL]
8
U. LM 130.0 (0∼255)
9
CENTR 120.0 (0∼255)
0
L. LM 110.0 (0∼255)
[COLOR DETECT]
SET=TO NEXT SUB-MENU ESC=BACK SEL=CHNG IMG TRG=POPUP
COLOR F C1 BRT
FINE ADJUSUTMENT SCREEN SAVE
69: (EXT COL) REF COL NOT SET
REGISTRATION WAS COMPLETED, PRESS SET KEY.
1
UP. L (248,232)
2
LO. R (263,247)
3
MOVE
4
REG
COLOR F C1 BRT
RECTANGLE RESET RETURN
X:248 Y:232